[c-nsp] vrf config on a sup720-3bxl

[McCallum, Robert]

Yes you can configure a vrf on a vlan interface BUT you cannot apply ANY QOS
metrics to that vlan interface.  Well to say you cant apply them is wrong
they just don't bloody work.

Robert McCallum 
 

> -----Original Message-----
> From: Per Carlson [mailto:ml at carlson.homeunix.net] 
> Sent: 24 February 2005 10:04
> To: Michael Lyngbøl
> Cc: cisco-nsp
> Subject: Re: [c-nsp] vrf config on a sup720-3bxl
> 
> 
> Michael Lyngbøl wrote:
> 
> >>i have a question about where it's possible to apply 'ip vrf 
> >>forwarding'
> >>on a 7600 with sup720-3bxl. i know you can use 
> subinterfaces on ws-x 
> >>linecards, but is it also possible on svi's (interface vlan x)?
> > 
> > 
> > Yes, it's possible.
> 
> thanks. i assume that is without the restriction mentioned in 
> the note.
> 
> per
> 
> 
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net 
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>