[c-nsp] single-slot-reload-enable

[Mario Antonio]

Rodney, Bruce,

Thanks for your reply.
I am using Version 12.1


----- Original Message ----- 
From: "Rodney Dunn" <rodunn at cisco.com>
To: "Mario Antonio" <dino at webjogger.net>
Cc: <cisco-nsp at puck.nether.net>
Sent: Wednesday, January 05, 2005 6:06 PM
Subject: Re: [c-nsp] single-slot-reload-enable


> I've seen this before I think.
>
> It's a cosmetic bug that it shows up in any platform
> other than a 75xx as Bruce says.
>
> What code are you seeing this on?
>
> Rodney
>
> On Wed, Jan 05, 2005 at 05:40:18PM -0500, Mario Antonio wrote:
> > Dear List,
> >
> > I am configuring a Cisco Router 2621XM with no serial interfaces, just
the
> > two fast-ethernet ports.
> > In one of the fast-ethernet interfaces, I plan to have a lot of dot1Q
vlans.
> >
> > I wonder about this configuration:
> > service single-slot-reload-enable
> >
> > Should I disable it?
> >
> >
> > Regards
> >
> > Mario Antonio
> >
> >
> >
> > ---
> > [This e-mail was scanned for viruses by Webjogger's AntiVirus Protection
System]
> >
> > _______________________________________________
> > cisco-nsp mailing list  cisco-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
> ---
> [This e-mail was scanned for viruses by Webjogger's AntiVirus Protection
System]
>
>

---
[This e-mail was scanned for viruses by Webjogger's AntiVirus Protection System]