[c-nsp] is it possible to set MED on a default route ?

[Manoj koshti]

Fo out going traffic from customer .
 
1.Provide can send MED to customer .
2.Customer can set Local Pref or weight.
 
for Incoming traffic .
1.Provide can ask customer to send MED or Community .
2.Customer can announce routes wilh AS path prepend.
 
Manoj
 


Pierfrancesco Caci <p.caci at seabone.net> wrote:

Hello, I have a customer that is asking for 2 circuits to be
configured as main and protection. They also asked for the default
route to be announced over BGP, and they have another provider that I
know nothing of.

The situation is more or less this:

Work
My-router-A --------|
Customer ----- Other transit
My-router-B --------|
Prot

Now, for what they announce to me, they can set a MED on the outgoing
route-map and it will just work.

But for what I announce to them, if they lower the localpref on the
protection circuit, in case of fault all traffic will go to the other
transit. As I am announcing them only the default route, can they set
different MEDs on these 2 defaults in their inbound route-map ?

Pf



-- 


-------------------------------------------------------------------------------
Pierfrancesco Caci | Network & System Administrator - INOC-DBA: 6762*PFC
p.caci at seabone.net | Telecom Italia Sparkle - http://etabeta.noc.seabone.net/
Linux paperino 2.4.20 #1 Mon Dec 2 17:02:14 CET 2002 i686 GNU/Linux

_______________________________________________
cisco-nsp mailing list cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

		
---------------------------------
Do you Yahoo!?
 Yahoo! Mail - You care about security. So do we.