[c-nsp] Problems with WIC-1DSU-T1-V2

[Jerry Shenk]

I think I've got the same problem.  I have an 1841 with a V2 WIC.  I can
run any type of loopback I want as long as it doesn't include the
smartjack and it tests clean.  I can't loop the smartjack and sprint
can't loop me.


---On Tue Sep 14 08:53:13 EDT 2004 Matthew Crocker said:

Hello,

    I have two routers,  3 T1s,  2 different customers.

1)  Cisco 1721 with WIC-1ADSL and WIC-1DSU-T1-V2 running 12.3.10  (HDLC 
T1 primary,  PPPoE DSL backup)
2)  Cisco 2620XM with 2 x WIC-1DSU-T1-V2 running 12.3.10 (MLPPP 2xT1 
primary)

Both routers come up with flaky T1 connections.   Sometimes they come 
up in alarm state, sometimes they come up clear.    Sometimes they 
clear on their own,  sometimes I can't get them to clear on a 5 foot 
loopback cable.  I have tested the T1s, they work perfectly. I can loop 
the T1s back to my network and run clean for days.  If  I type 'clear 
service-module serial 0/0'  the WIC resets and sometimes it comes up 
clear.   When I do get the T1s up I can beat on them with 0 packet 
loss, 0 errors.

I don't see any errors with the WIC starting up/loading.  show 
tech-support looks good.  The T1s just stay down/down with the AL light 
lit on the WIC

I'm thinking it is a software problem with the version 2 WIC.   Does 
anyone else see problems like this?  Any solution?

-Matt



--------------------------------------------------------------
Jerry A. Shenk - DAD, MCNE (NW2.15 thru 6), CCNA, GCIA (Intrusion
Analyst)
GCIH (Incident Handler), GSNA (Network Auditor), GCFW (Firewalls), GCFA
(forensics)
Sr. Systems Engineer - Computer Networking Services
D&E Networks, Inc.
jshenk at decommunications.com 

my website: http://jerryslinux.dyndns.org/jas - PGP sig. file on this
site