[c-nsp] Re: merging 2 flashes into one filesystem

[Sorin CONSTANTINESCU]

Hi, all.

I bought a couple of PCMCIA CF adapters, installed them in one of the
RSP4+, but i can't format or read it. The CF and the adapters are ok,
since i checked them on a laptop.

Router#sh ver | i RSP4+
cisco RSP4+ (R5000) processor with 262144K/2072K bytes of memory.
Slave: cisco RSP4+ (R5000) processor with 262144K bytes of memory.
Router#sh ver | i ATA  
31744K bytes of ATA PCMCIA card at slot 0 (Sector size 512 bytes).
31296K bytes of ATA PCMCIA card at slot 1 (Sector size 512 bytes).
Router#format slot0:
Format operation may take a while. Continue? [confirm]
Format operation will destroy all data in "slot0:".  Continue? [confirm]
Enter volume ID (up to 64 chars)[default slot0]: 
%Error formatting slot0 (Unspecified error)
Router#format slot1:
Format operation may take a while. Continue? [confirm]
Format operation will destroy all data in "slot1:".  Continue? [confirm]
Enter volume ID (up to 64 chars)[default slot1]: 
%Error formatting slot1 (Unspecified error)
Router#
Router#dir slot0:
%Error opening slot0:/ (Device not ready)
Router#

Are there any tricks i should know?

Thanks,

On Mon, 10 Jan 2005 14:41:07 -0500, Rodney Dunn <rodunn at cisco.com> wrote:
> We support flashdisk on an RSP4+ but not on the RSP4.
> 
> Rodney
> 
> 
> On Mon, Jan 10, 2005 at 09:31:40PM +0200, Sorin CONSTANTINESCU wrote:
> > Thanks everybody! I'll get a PCMCIA adapter, since i want to use it in a RSP4+.
> >
> > Regards,
> > --
> > Sorin CONSTANTINESCU
> > consta at gmail.com
> > Linux Registered User #222086
> > _______________________________________________
> > cisco-nsp mailing list  cisco-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
> 


-- 
Sorin CONSTANTINESCU
consta at gmail.com
Linux Registered User #222086