[c-nsp] 12.0.30S (NPE-150)

Gert Doering gert at greenie.muc.de
Wed Jan 12 02:46:21 EST 2005


Hi,

On Tue, Jan 11, 2005 at 10:02:32PM -0800, Ted Mittelstaedt wrote:
[..]
> Of course eventually that old gear will go away, even if not
> as quickly as Cisco's sales group would like, it will eventually
> go away.  I'm just curious as to how far along that you really
> are.  Obviously there were not nearly as many NPE 100's and 150's
> that went out the door as NPE 200's, thus it was a no brainer to
> drop support for them.  My guess is the NPE200 is a much
> different story - most used 7xxx series routers I've seen
> on the secondary market have them, few ever had NPE150's.

I'm personally not so worried about the NPE-100/150/200s (as those have
either already been replaced by 225s or moved to CPE roles where they
can happily run along with some 12.2 main IOS that still works) but about 
the C7200-I/O-FE boards.  All our NPE-225 and most NPE-400 routers have
these, and finding them non-working after installing a 12.2S upgrade
is sort of "scary"...

gert
-- 
USENET is *not* the non-clickable part of WWW!
                                                           //www.muc.de/~gert/
Gert Doering - Munich, Germany                             gert at greenie.muc.de
fax: +49-89-35655025                        gert at net.informatik.tu-muenchen.de


More information about the cisco-nsp mailing list