[c-nsp] Cisco 7304 as a Border router

[Mark Prior]

sthaug at nethelp.no wrote:

>>IOS choices are pretty limited and the way Cisco is handling 12.2S is 
>>confusing. At least it does jumbo frames on the GbE ports which is 
>>better than a 7206VXR/G1.
> 
> 
> Really? We have multiple 7206VXR/NPE-G1 which handle jumbo frames on
> the GigE ports just fine. Both 12.0S and 12.2S.

I'd be interested to know the IOS revision for 12.2S (since I need IPv6).

sea-b-bb1#sh hard | inc 7200 Software
Cisco IOS Software, 7200 Software (C7200-K91P-M), Version 12.2(25)S, 
RELEASE SOFTWARE (fc2)
sea-b-bb1#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
sea-b-bb1(config)#int gi4/0
sea-b-bb1(config-if)#mtu ?
   <1500-4470>  MTU size in bytes

sea-b-bb1(config-if)#mtu

4470 is bit smaller than the 9000+ I wanted :)

Mark.