[c-nsp] 7600 does not boot 12.2

[MADMAN]

   The only tftp application that I found that works is 3Coms for these 
40+ Meg files.

   Dave

Jon Lewis wrote:
> On Mon, 17 Jan 2005, Konstantin Barinov wrote:
> 
> 
>>Hi again 7600/6500 gurus,
>>
>>
>>7603 does not want to boot 12.2, but 12.1 loads and works fine.
>>
>>config is:
>>
>>boot system flash disk0:c6k222-ps-mz.122-18.SXD3.bin
>>boot system flash sup-bootflash:c6sup22-ps-mz.121-26.E.bin
> 
> 
> Those 122-18.SXD images are HUGE.  Did you follow the docs and use
> something other than tftp to xfer it to the router?  Are you sure you have
> the full image on the router and not a corrupt/truncated one?
> 
> cisco warns that many tftp implementations cannot xfer >32mb files
> properly...and when I tried tftping a 38mb image to a 6509, it
> failed/truncated the image.  I had to use FTP instead of TFTP.
> 
> ----------------------------------------------------------------------
>  Jon Lewis                   |  I route
>  Senior Network Engineer     |  therefore you are
>  Atlantic Net                |
> _________ http://www.lewis.org/~jlewis/pgp for PGP public key_________
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
> 

-- 
David Madland
CCIE# 2016
Sr. Network Engineer
Qwest Communications
612-664-3367

"Emotion should reflect reason not guide it"