[c-nsp] Re: Max VC's per ATM DS3 Card?

[Brian Lehigh]

A simple "show interface atmX/X" will tell you how many you can have and how
many are currently active.

router#sh int atm 3/0
ATM3/0 is up, line protocol is up 
  Hardware is ENHANCED ATM PA
    MTU 4470 bytes, sub MTU 4470, BW 44209 Kbit, DLY 190 usec, 
     reliability 255/255, txload 60/255, rxload 29/255
  Encapsulation ATM, loopback not set
  Encapsulation(s): AAL5 
  4095 maximum active VCs, 2335 current VCCs	<-------

Brian Lehigh
Network Operations Center
Sierra Tel Internet
http://www.sti.net
 

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Robert Blayzor
Sent: Wednesday, January 19, 2005 1:29 PM
To: Claydon, Tom
Cc: cisco-nsp at puck.nether.net
Subject: [c-nsp] Re: Max VC's per ATM DS3 Card?

Claydon, Tom wrote:
> We have a Cisco 7206VXR with a single port ATM DS3 card in it. What is
> the maximum number of VC's that I can put on this card?


Assuming you have the PA-A3-T3= card, 4095.

-- 
Robert Blayzor, BOFH
INOC, LLC
rblayzor\@(inoc.net|gmail.com)
PGP: http://www.inoc.net/~dev/
Key fingerprint = 1E02 DABE F989 BC03 3DF5  0E93 8D02 9D0B CB1A A7B0

Portable:  Survives system reboot.
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/