[c-nsp] Re: CAR not working (or not showing) for access-lists with precedence

[Sorin CONSTANTINESCU]

I tried 2 things:

1) set a "permit ip any any" at the end of the access-list and this
sequence shows matches
2) an access-list with a match for precedence set as an access-group
on the subinterface shows matches for the sequence with precedence...

Sounds to me like a software bug... :(

On Thu, 20 Jan 2005 17:51:40 +0200, Sorin CONSTANTINESCU
<consta at gmail.com> wrote:
> Hi,
> 
> I have a 7513 running rsp-pv-mz.123-11.T2.bin with dot1q subifs, and
> rate-limits on access-list which match not only the ip address, but
> also the precedence. I compared this image with rsp-pv-mz.122-26.bin,
> and there's nothing that sounds line a feature i'm missing.
> 
> The bytes collected via SNMP for this access-list are always 0, and
> the "show interface Fax/x/x.y rate-limit" doesn't show any conformed
> packets, nor bytes.
> 
> I can't test yet to see if this is only a cosmetic bug...
> 
> Has anyone else ran into this?
> 
> TIA
> --
> Sorin CONSTANTINESCU
> consta at gmail.com
> Linux Registered User #222086
> 


-- 
Sorin CONSTANTINESCU
consta at gmail.com
Linux Registered User #222086