[c-nsp] tag-switching on the 6500?

[Greg Schwimer]

Forgot to mention, if you have an OSM it will support it (i.e. 7600).  I 
believe support is still basic.

Greg Schwimer wrote:

>I'm running this, but on Sup720-3bxl.  AFAIK it's not supported on 
>Sup2/MSFC2, even though you can turn it on.  YMMV.
>
>Jon Lewis wrote:
>
>  
>
>>Is anyone doing tag-switching on 6500s mixed with cisco router platforms
>>(7xxx, 36xx)?  While trying to turn up a 6509 (sup2/msfc2/pfc2) running
>>12.2(18)SXD3, I've found that while TDP appears to work, our 7500s fail to
>>switch some packets tagged by the 6509.  I've been afraid to turn on much
>>debugging on live routers passing large amounts of traffic, the above is
>>about all the detail I have so far.
>>
>>I'm basically wondering if there's some knob I've not encountered on the
>>router platforms that needs to be set on the 6509 in order for
>>tag-switching to work properly, or if it just doesn't entirely work on
>>sup2/msfc2?
>>
>>----------------------------------------------------------------------
>>Jon Lewis                   |  I route
>>Senior Network Engineer     |  therefore you are
>>Atlantic Net                |
>>_________ http://www.lewis.org/~jlewis/pgp for PGP public key_________
>>_______________________________________________
>>cisco-nsp mailing list  cisco-nsp at puck.nether.net
>>https://puck.nether.net/mailman/listinfo/cisco-nsp
>>archive at http://puck.nether.net/pipermail/cisco-nsp/
>> 
>>
>>    
>>
>_______________________________________________
>cisco-nsp mailing list  cisco-nsp at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-nsp
>archive at http://puck.nether.net/pipermail/cisco-nsp/
>  
>