[c-nsp] Trying to get an ATM ciruit up

[Voll, Scott]

I'm on the phone and they are telling me yes, c-bit ADM.

-----Original Message-----
From: Bruce Pinsky [mailto:bep at whack.org] 
Sent: Thursday, January 20, 2005 1:02 PM
To: Voll, Scott
Cc: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] Trying to get an ATM ciruit up

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Voll, Scott wrote:
| Router1#sh controllers atm
| ATM4/0/0: Port adaptor specific information
|  Hardware is DS3 (45000Kbps) port adaptor
|  Framer is PMC PM7345 S/UNI-PDH, SAR is LSI ATMIZER II
|  Firmware rev: G152, ATMIZER II rev: 3
|  Framing mode: DS3 C-bit ADM
|  Default Maximum Queue Length: 0
|  Facility alarm: OOF LossOfCellDelineation
| Facility statistics: current interval elapsed 524 seconds
|

You are getting an OOF (Out of Frame) alarm.  Is this DS3 really
provisioned C-bit ADM?

- --
=========
bep

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.5 (MingW32)

iD8DBQFB8BwqE1XcgMgrtyYRAt2kAJ44+f+qF4n1cszbL6kLa9UY9/C3+ACguXGd
gNNSf2WQxegZR0NiiaSHMoE=
=aa+b
-----END PGP SIGNATURE-----