[c-nsp] 3750/3550 SMI vs EMI

[Koen Peetermans]

Strange. I don't see any difference in downloading a SI or EI image for the
2950 ? As far as I know it's the same image, but it detects automatically if
it is a EI or SI hardware.

According to Cisco SI hardware is not upgradeable to EI, unless you buy a
switch that is EI.

Can you point me to two different images for the 2950 being SI and EI ?

Kind regards,

Koen.

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of matthew zeier
Sent: zaterdag 22 januari 2005 22:43
To: Gert Doering
Cc: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] 3750/3550 SMI vs EMI

> On Sat, Jan 22, 2005 at 10:29:42AM -0800, matthew zeier wrote:
>> Is the SMI to EMI upgrade on either the 3750 or 3550 a software upgrade 
>> or
>> an actual hardware upgrade as it is with the 2950?
>
> 2950 is a hardware upgrade?  What will they change?

The whole unit.  I loaded the EMI image on a 2950T-48-SI and it failed to 
load, spitting out an error about the hardware not supporting the E image. 
I was dumped into RMON and had to xmodem a 6MB image (ugh) to it. 

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/