[c-nsp] 2811 router doesn't recognize T-1 WICs?

[Jay Hennigan]

On Wed, 26 Jan 2005, Rodney Dunn wrote:

> For the record.
>
> If you have a case open and the bug is not
> viewable on CCO then ask the TAC engineer
> to make it viewable.
>
> There are usually only two reasons a bug
> is not viewable on CCO.
>
> a) PSIRT
> b) It was found internally in testing and was thought
>    to only exist in images that were never released to customers.
>    If it's determined it was in an image released to a customer
>    the correct procedure is to modify that bug so it is visible
>    on CCO with the correct enclosures (ie: Release-note).

In my particular case, this doesn't appear to be an IOS bug but a bad
production run of the WIC cards themselves.

--
Jay Hennigan - CCIE #7880 - Network Administration - jay at west.net
WestNet:  Connecting you to the planet.  805 884-6323      WB6RDV
NetLojix Communications, Inc.  -  http://www.netlojix.com/