[c-nsp] Better way of finding out the source of process switched traffic?

[Dave Temkin]

Thanks Rodney.

The one thing I'm hesitant to blame it on is the fact that the actual
NAT'ed traffic is very very little (it's AIM conversations, that's it).
So I'm wondering why on a box that's as big as this one (NPE-400) it'd
choke on that...

-Dave

-- 
David Temkin

On Thu, 27 Jan 2005, Rodney Dunn wrote:

> Your problem is almost surely that the packets
> being punted are TCP control packets where
> we punt to create/tear down the translations.
> SYN, FIN, RST.
>
> If you want to see the packets at process
> level you can either turn on:
> debug ip packet <acl> to limit the granularity of
> the debug since that only prints packets at process
> level. /*not true for 12.2S with the right commands*/
>
> You can also do "sh buffers input-interface <name> packet"
> a few times and catch some packets in the buffer and
> manually decode the TCP header to see if the flags are set
> in the header.
>
> Now, in 12.3(4)T and later we made some NAT enhancements
> where we create the flows in the CEF path without punting
> traffic.  That is the suggested way to go if you are seeing
> a high number of process switched traffic with NAT enabled.
>
> Rodney
>
> On Thu, Jan 27, 2005 at 07:42:33AM -0500, Dave Temkin wrote:
> > I've got an internet-facing router that's seeing a very high rate of
> > process switched traffic.  Nothing too crazy is configured on this router
> > - a little bit of NAT, a couple of route maps, BGP.  That's about it.
> > Aside from doing a debug ip packet and killing the router (it's passing
> > about 30-40mbit of traffic), are there any other options for tracking down
> > what's in the process queue?  Router is running 12.3.6a
> >
> > FastEthernet0/0
> >           Throttle count          4
> >                    Drops         RP          5         SP          0
> >              SPD Flushes       Fast       3103        SSE          0
> >              SPD Aggress       Fast          0
> >             SPD Priority     Inputs   83215964      Drops          0
> >
> >     Protocol  IP
> >           Switching path    Pkts In   Chars In   Pkts Out  Chars Out
> >                  Process 1803602701 4025634609 1661069368  456573125
> >             Cache misses          0          -          -          -
> >                     Fast 2713542052 1802705001 3837108389  304620460
> >                Auton/SSE          0          0          0          0
> >
> >
> > FastEthernet1/0 Outside
> >           Throttle count          0
> >                    Drops         RP          0         SP          0
> >              SPD Flushes       Fast       1796        SSE          0
> >              SPD Aggress       Fast          0
> >             SPD Priority     Inputs    6927146      Drops          0
> >
> >     Protocol  IP
> >           Switching path    Pkts In   Chars In   Pkts Out  Chars Out
> >                  Process  543622379 2397426796  317919218 1743487367
> >             Cache misses          0          -          -          -
> >                     Fast 3071349692 1923264716 1211037578 2505497398
> >                Auton/SSE          0          0          0          0
> >
> >
> > FastEthernet2/0 Outside 2
> >           Throttle count          0
> >                    Drops         RP          0         SP          0
> >              SPD Flushes       Fast       1480        SSE          0
> >              SPD Aggress       Fast          0
> >             SPD Priority     Inputs   42435822      Drops          0
> >
> >     Protocol  IP
> >           Switching path    Pkts In   Chars In   Pkts Out  Chars Out
> >                  Process 1056561152 1934756549 1414955036 1939153311
> >             Cache misses          0          -          -          -
> >                     Fast  819752907  318162363 1502399074 1302221329
> >                Auton/SSE          0          0          0          0
> >
> >
> > !
> > interface FastEthernet0/0.101
> >  encapsulation dot1Q 101
> >  ip address x.x.x.x x.x.x.x.x
> >  no ip redirects
> >  no ip proxy-arp
> >  ip nat inside
> >  ip policy route-map RM101
> >  no cdp enable
> >  standby 101 ip x.x.x.y
> >  standby 101 timers 1 3
> >  standby 101 priority 250
> >  standby 101 preempt
> >  standby 101 name HSRP101
> > !
> >
> > !
> > interface FastEthernet1/0
> >  description Outside 1
> >  ip address x.x.x.x x.x.x.x
> >  ip access-group Yipes-Outside in
> >  ip nat outside
> >  load-interval 30
> >  duplex full
> >  ntp disable
> >  hold-queue 300 in
> >  hold-queue 300 out
> >
> >
> > -Dave
> > _______________________________________________
> > cisco-nsp mailing list  cisco-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
>