[c-nsp] Privilege levels and Secure ACS

[Serguei Bezverkhi]

Hi,

Why do not you use "show config" command??? Change its privilege level to
the level you want.

HTH 

Serguei

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Jee Kay
Sent: Monday, July 04, 2005 11:33 AM
To: Kim Onnel
Cc: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] Privilege levels and Secure ACS

On 7/4/05, Kim Onnel <karim.adel at gmail.com> wrote:
> troublesome, i want the noc users to be able to show running-config,
clear,
> reload, ... and all the arguments for these commands, i used * and it
worked
> for all commands except for "sh run", i found my self having to add alot
of
> things.
> 
> privilege exec level 2 show running-config

If you figure out how to make show running-config do something same
for anyone who isn't priv 15, please do let the rest of us know :)

Here it just ends up showing empty configs, and I havn't the patience
to go through giving 'privilege config' levels to every possible
category - partly because it goes against the ethos of easy
management, and mostly because when a new category is inevitably added
I will miss it and my config backups will go poof.

Ras

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/