[c-nsp] Privilege levels and Secure ACS

[Collins Richard, SLC SBS ITO (SHA)]

     See this link which explains your problem:

http://www.cisco.com/warp/public/63/showrun.shtml
<http://www.cisco.com/warp/public/63/showrun.shtml> 
 
Your actual configuration should work if you use the command, show
startup-config.
That however might not be adequate for your application.
 
Rich
 
On 7/4/05, Kim Onnel < karim.adel at gmail.com <mailto:karim.adel at gmail.com> >
wrote:
> troublesome, i want the noc users to be able to show running-config,
clear,
> reload, ... and all the arguments for these commands, i used * and it
worked
> for all commands except for "sh run", i found my self having to add alot
of
> things.
> 
> privilege exec level 2 show running-config
 
If you figure out how to make show running-config do something same
for anyone who isn't priv 15, please do let the rest of us know :)
 
Here it just ends up showing empty configs, and I havn't the patience
to go through giving 'privilege config' levels to every possible
category - partly because it goes against the ethos of easy
management, and mostly because when a new category is inevitably added
I will miss it and my config backups will go poof.
 
Ras
 
_______________________________________________