[c-nsp] Re: atm ds3 to a cisco 7200 for adsl aggregation

[Roger Weeks]

Chad -

Take out the UNI configuration.  You don't need UNI for this  
configuration at all.  If I remember correctly, UNI is only needed  
when you're doing things like LANE or Classical IP, and is only  
required when you're connecting end-user stations directly to ATM.

Other than that, your main ATM interface config is almost identical  
to mine.  We have a DS3 through SBC and here's what it looks like:

interface ATM2/0
   bandwidth 45000
   no ip address
   ip flow ingress
   ip route-cache flow
   no ip mroute-cache
   logging event subif-link-status
   atm scrambling cell-payload
   atm framing cbitplcp
   no atm ilmi-keepalive
   no clns route-cache
end

--
Roger J. Weeks
Systems & Network Administrator
Mendocino Community Network

On Jul 9, 2005, at 4:36 AM, cisco-nsp-request at puck.nether.net wrote:

> Message: 8
> Date: Sat, 9 Jul 2005 00:36:22 -0500 (CDT)
> From: "Chad Whitten" <cwhitten at nexband.com>
> Subject: [c-nsp] atm ds3 to a cisco 7200 for adsl aggregation
>
> im trying to get an atm ds3 from bellsouth turned up on a cisco  
> 7206 with
> a pa-t3 card and not having much luck.  ive searched through the list
> archives and tried pieces of configs from different folks but no go.
>
> my subscriber has a link and the bellsouth tech's can see the modem
>
> my interface on my router shows up/up but all i see is input and no  
> output
> and most of the input is errors.
>
> the router is connected to a ds3 that is fed off a lucent  
> metropolis dmx
> oc12 shelf.  the atm switch is a lucent cbx.  if i loop up my  
> interface,
> the lucent cbx can see the loop and a loop on the oc12 will show up  
> on the
> cbx.
>
> bell is telling me im missing something in my config but wont/cant  
> tell me
> what and im at a loss. could anyone suggest anything?
>
> my atm config is
> interface ATM4/0
>  description DS3_ATM
>  no ip address
>  ip route-cache flow
>  no ip mroute-cache
>  atm clock INTERNAL
>  atm scrambling cell-payload
>  atm framing cbitplcp
>  atm uni-version 4.0
>  no atm auto-configuration
>  no atm ilmi-keepalive
>  no atm address-registration
>  no atm ilmi-enable
>
> ive tried different framing (cbitadm, m23plcp & m23adm), different
> uni-version, no scrambling, scrambling, clock internal and clock  
> line - no
> go on any of them.