[c-nsp] how to know power supply - AC or DC ? from command promp .

[Michael Markstaller]

I've never seen DC models but they should say it from the "sh ver", probably some "-DC" in the model number.
Otherwise partnumbers from below may help, if you've got the same it's AC..

WS-C2950T-24 with AC:
s04689#sh ver | inc Power
Power supply part number: 34-0965-01
Power supply serial number: PHI08010L0Q

WS-C3750G-24T with AC:
s04602#sh ver | inc Power
cisco WS-C3750G-24T (PowerPC405) processor (revision D0) with 118784K/12280K bytes of memory.
Power supply part number        : 341-0048-01
Power supply serial number      : DTH081910E4

to see RPS you can use "sh env all" on both..

Michael 

> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net 
> [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of 
> Baldev Vaishnav
> Sent: Tuesday, July 12, 2005 3:12 AM
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] how to know power supply - AC or DC ? from 
> command promp .
> 
> Hi Team,
>  
> We have ws-2950G and 3750S in our network.I have only telnet 
> access.How can i know that the device is having AC or DC supply.
>  
> are there any commands ?
>  
> Thanks,
> Baldev