[c-nsp] Minimum Sun hardware requirement for running ACS

[Jerry K]

This is the same for the Unix version of Cisco Secure ACS.  Once 
installed and up-on-line, it is configured through a web browser 
interface.  Either locally or remotely.

Jerry K




Scott Altman wrote:
> I think there is a minor misunderstanding here.  You can access the
> ACS GUI from anywhere, it's not one of those 'only-runs-on-localhost'
> apps, so you can configure it from your desk or wherever.  The ACS GUI
> runs on it's own port (tcp:2002) so there is no web-server admin
> associated with it.  Or what am I missing here about your situation?
> 
> ACS does have a CLI component, but I don't know if it supports 100% of
> the features that are available in the GUI and overall support and
> advice would be a nightmare as I would suspect everyone uses the GUI.
> 
> - Scott
> 
> 
>>Need to know so that we either get eXceed clients or get a 
>>graphics card+screen for the SunFire V120 included in the 
>>budget
> 
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/