[c-nsp] DSL aggregation on 122-25.S5

[Rodney Dunn]

What platform are you talking about?

It's really a bad idea to migrate to 12.2S right now
with a feature that isn't supported in the post CEF rewrite
code 12.2(25)S because your migration path is nowhere..yet.

We are working on fixing that.

Rodney




On Fri, Jul 15, 2005 at 12:33:42AM -0700, Chris Cappuccio wrote:
> None of what you're doing look like they would be broke in 12.2(18)S or
> 12.2(14)S either.
> 
> james edwards [hackerwacker at cybermesa.com] wrote:
> > I understand that DSL aggregation features are being added to the S train. I
> > would like to know
> > if current S train will support my DSL configs. I opened a case with TAC;
> > all they did is load my config
> > and tell me "It loads without error".  I was seeking a bit more guidance.
> > 
> > Here are the DSL configs I use for DSL, is anyone doing DSL agg on S or can
> > someone from Cisco
> > comment on if my basic requirements for DSL agg are now supported by current
> > 12S ?
> > I am using Radius to provide auth (AAA) for the PPPoA.
> > 
> > Multipoint, bridged and routed:
> > 
> > !
> > interface ATM3/0.1 multipoint
> >  description xxxxx bridged customer connections
> >  no ip mroute-cache
> >  atm pvc 131 1 31 aal5snap
> >  atm pvc 134 1 34 aal5snap
> >  bridge-group 1
> >  bridge-group 1 spanning-disabled
> > 
> > !
> > interface ATM3/0.2 multipoint
> >  description #1 xxxxx routed customer connections
> >  ip address 216.253.145.129 255.255.255.128
> >  no ip mroute-cache
> >  pvc 1/46
> >   protocol ip 216.253.145.133 no broadcast
> > 
> > 
> > PPPoA:
> > 
> > 
> > !
> > interface ATM4/0.32 point-to-point
> >  description xxxx DSL
> >  no ip mroute-cache
> >  pvc 1/32
> >   encapsulation aal5mux ppp Virtual-Template1
> > 
> > 
> > !
> > interface Virtual-Template1
> >  description xxxx_WAN1 DSL customers
> >  ip unnumbered Loopback1
> >  ip verify unicast source reachable-via rx allow-self-ping
> >  peer default ip address pool xxxxx_WAN1
> >  keepalive 15
> >  ppp authentication pap
> > 
> > 
> > Route-bride IP:
> > 
> > !
> > interface ATM4/0.60 point-to-point
> >  description xxxx DSL
> >  ip unnumbered Loopback2
> >  no ip mroute-cache
> >  atm route-bridged ip
> >  atm arp-server self
> >  pvc 1/60
> >   encapsulation aal5snap
> >  !
> >  arp timeout 1200
> > 
> > ip route 1.1.1.1 255.255.255.255 ATM4/0.60
> > 
> > 
> > James H. Edwards
> > Routing and Security Administrator
> > At the Santa Fe Office: Internet at Cyber Mesa
> > jamesh at cybermesa.com  noc at cybermesa.com
> > http://www.cybermesa.com/ContactCM
> > (505) 795-7101
> > 
> > _______________________________________________
> > cisco-nsp mailing list  cisco-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
> 
> -- 
> "Attacks always get better; they never get worse."
>   -- "Old NSA saying"
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/