[c-nsp] PIX 515e VPN

Alvaro R askxfs at gmail.com
Thu Jul 21 22:16:07 EDT 2005


No luck :(


On 7/21/05, Mark Kelly <markk at indigo.ie> wrote:
> Try remove the below line.
> 
> crypto dynamic-map outside_dyn_map 20 match address outside_cryptomap_dyn_20
> 
> ----- Original Message -----
> From: "Alvaro R" <askxfs at gmail.com>
> To: <cisco-nsp at puck.nether.net>
> Sent: Thursday, July 21, 2005 10:26 PM
> Subject: [c-nsp] PIX 515e VPN
> 
> 
> > Hello, I would like some advice regarding a Cisco PIX 515e.
> >
> > I am trying to allow road warriors to get access to the inside LAN,
> > using the Cisco client (tried versions 4.0.5 and 4.6).
> >
> > I am able to get the IP for client/dns/wins but I cannot ping or
> > anything else, it just won't work.
> >
> > this PIX is used as a gateway and does NAT for the internal LAN, also
> > it connects to a remote PIX via pre-share keys, that works just fine.
> >
> > pertinent config follows:
> >
> > access-list ipsec-remote permit ip 10.159.1.0 255.255.255.0 10.0.0.0
> 255.0.0.0
> > access-list ipsec-remote permit ip 10.159.1.0 255.255.255.0
> > 192.168.0.0 255.255.0.0
> > access-list nonat-inside permit ip 10.159.1.0 255.255.255.0 10.0.0.0
> 255.0.0.0
> > access-list nonat-inside permit ip 10.159.1.0 255.255.255.0
> > 192.168.0.0 255.255.0.0
> > access-list nonat-inside permit ip 10.159.1.0 255.255.255.0 10.159.2.0
> > 255.255.255.0
> > access-list ipsec-road permit ip 10.159.1.0 255.255.255.0 10.159.2.0
> > 255.255.255.0
> > access-list outside_cryptomap_dyn_20 permit ip any 10.159.2.0
> 255.255.255.0
> >
> > ip local pool ippool1 10.159.2.2-10.159.2.253
> >
> > global (outside) 10 interface
> > nat (inside) 0 access-list nonat-inside
> > nat (inside) 10 0.0.0.0 0.0.0.0 dns 0 0
> > access-group acl_out in interface outside
> > route outside 0.0.0.0 0.0.0.0 ext.gw.ip.here 1
> >
> > sysopt connection permit-ipsec
> > crypto ipsec transform-set remote esp-3des esp-md5-hmac
> > crypto ipsec security-association lifetime seconds 5000
> > crypto dynamic-map outside_dyn_map 20 match address
> outside_cryptomap_dyn_20
> > crypto dynamic-map outside_dyn_map 20 set transform-set remote
> > crypto map remote 10 ipsec-isakmp
> > crypto map remote 10 match address ipsec-remote
> > crypto map remote 10 set peer *.*.91.112
> > crypto map remote 10 set transform-set remote
> > crypto map remote 65535 ipsec-isakmp dynamic outside_dyn_map
> > crypto map remote interface outside
> >
> > isakmp enable outside
> > isakmp key ******** address *.*.91.112 netmask 255.255.255.255
> > isakmp identity address
> > isakmp policy 10 authentication pre-share
> > isakmp policy 10 encryption 3des
> > isakmp policy 10 hash md5
> > isakmp policy 10 group 2
> > isakmp policy 10 lifetime 5000
> >
> > vpngroup road address-pool ippool1
> > vpngroup road dns-server 10.159.1.1 10.159.1.4
> > vpngroup road wins-server 10.159.1.2
> > vpngroup road default-domain bla.com
> > vpngroup road idle-time 1800
> > vpngroup road password ********
> >
> > Any hints?
> >
> >
> > Thanks,
> >
> > Alvaro
> >
> > _______________________________________________
> > cisco-nsp mailing list  cisco-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
> >
> 
>



More information about the cisco-nsp mailing list