[c-nsp] Cisco 7200 MPLS RAM Question - revised

[Eric Kagan]

Sorry - I hit enter too quick without thinking.  Before I get slammed with
not enough info - see below:
> Anyone running 12.2.25S on an NPE 300 256MB with multiple BGP 
> neighbors\peers (taking multiple Full tables) ?  I am most concerned with
memory.


>show ver
System image file is "slot0:c7200-is-mz.121-17a.bin"
cisco 7206VXR (NPE300) processor (revision B) with 229376K/65536K bytes of
memory.


>show ip bgp su
BGP table version is 45190299, main routing table version 45190299
165250 network entries and 540857 paths using 35500102 bytes of memory
136981 BGP path attribute entries using 8225460 bytes of memory
79682 BGP AS-PATH entries using 2130918 bytes of memory
3293 BGP community entries using 228632 bytes of memory
0 BGP route-map cache entries using 0 bytes of memory
0 BGP filter-list cache entries using 0 bytes of memory
BGP activity 1306492/2225785 prefixes, 28009566/27468709 paths, scan
interval 60 secs

>show mem
                Head    Total(b)     Used(b)     Free(b)   Lowest(b)
Largest(b)
Processor   618ABB00   209011968   156771464    52240504    49365848
49210736
      I/O   20000000    33554432      322504    33231928    33125152
33198972
    I/O-2    E000000    33554440     3615896    29938544    29938544
29938492


>  
> Thanks
> Eric
>  
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net 
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>