[c-nsp] Routing table
Jean-Christophe Varaillon
jcvaraillon at dolnet.gr
Tue Jul 26 17:36:44 EDT 2005
> > The CPU is flirting with the 35% at peack hours.
> >
> You never mentioned what platform this is, but for older platforms BGP
> Scanner itself can easily add 10-15% (on 5 minute averages) of
> background noise.
7206VXR (NSE-1), handling 40Mbps of traffic.
> What's your utilization break down of interrupt vs. process cpu?
I am not sure how to check this : /
> Are the 'internal routers' participating in BGP or are the edges injecting
> a default into the IGP?
There are three ISPs, two ASBRs and two internal routers.
The internal routers are route-reflector clients receiving the most usefull
routes only (#2000 prefixes).
The internal routers are defaulting to a network, learnt via BGP as well.
More information about the cisco-nsp
mailing list