RES: [c-nsp] Best practices

[Murilo Antonio Pugliese]

Packet memory on RSP (MEMD) buffers is distributed between all interfaces at bootup, when there is an online 
insertion and removal (OIR), a microcode reload, a maximum transmission unit (MTU) change, or a cbus complex. 
When MEMD buffers are distributed the router suffers a war reload, during this period all services gets unavailable.

-----Mensagem original-----
De: Geoffrey Cauchi [mailto:geoffrey.cauchi at datastream.com.mt]
Enviada em: quarta-feira, 27 de julho de 2005 05:32
Para: 'Leonardo Souza'; cisco-nsp at puck.nether.net
Assunto: RE: [c-nsp] Best practices

Hi 

Please note that the PA is not hot swappable/pluggable.  You need to remove
VIP, install PA, and re-insert VIP.  After the VIP is inserted, usually the
7513 does not require any reload.

Gef


-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Leonardo Souza
Sent: 27 July 2005 08:11
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] Best practices

Hi all. I'd like to know if it's a best practice to reload a 7513 router
after a PA insertion in a VIP.

regards,
Leonardo Gama

-- 
GMX DSL = Maximale Leistung zum minimalen Preis!
2000 MB nur 2,99, Flatrate ab 4,99 Euro/Monat: http://www.gmx.net/de/go/dsl
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/



_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/