[c-nsp] Best practices

[Tantsura, Jeff]

And most important don't forget suitable screwdriver :)


--
Jeff Tantsura  CCIE# 11416
Senior IP Network Engineer


-----Original Message-----
From: Justin M. Streiner [mailto:streiner at cluebyfour.org] 
Sent: 27 July 2005 14:44
To: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] Best practices

On Wed, 27 Jul 2005, Leonardo Souza wrote:

> Hi all. I'd like to know if it's a best practice to reload a 7513 router
> after a PA insertion in a VIP.

You can, but it's not necessary if you use stable code :-)

Just remember that you have to eject the VIP from the chassis, insert the 
PA into the VIP, then re-insert the VIP.  VIPs are hot swappable, but the 
individual PAs aren't.

jms
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/