[c-nsp] Best practices

[Joe Maimon]

But quite likely will pause for about 30 seconds after re-insertion. 
Apparently this is quite normal.

DO schedule this for maintenance window ONLY.

Geoffrey Cauchi wrote:
> Hi 
> 
> Please note that the PA is not hot swappable/pluggable.  You need to remove
> VIP, install PA, and re-insert VIP.  After the VIP is inserted, usually the
> 7513 does not require any reload.
> 
> Gef
> 
> 
> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net
> [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Leonardo Souza
> Sent: 27 July 2005 08:11
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] Best practices
> 
> Hi all. I'd like to know if it's a best practice to reload a 7513 router
> after a PA insertion in a VIP.
> 
> regards,
> Leonardo Gama
>