[c-nsp] Cisco 7200VXR/NPE-300 & NPE-G1 Crash with PA-2FE-FX

Rodney Dunn rodunn at cisco.com
Fri Jul 29 18:27:46 EDT 2005


Can anyone that is seeing this problem or that can
reproduce it in a lab let me know?

We haven't been able to make it happen in our lab yet.

If you see it please open a TAC case and ask them
to attach your case to:

CSCsa50332
Externally found moderate defect: Waiting (W)
VIP4-80 with PA-2FE-TX may crash with parity error

Rodney

On Mon, Jul 18, 2005 at 08:10:47AM +0200, Gert Doering wrote:
> HI,
> 
> On Mon, Jul 18, 2005 at 12:30:20PM +1200, Craig Spiers wrote:
> > Has anyone come across a 7200/vxr with npe-300 (also npe-g1) crashing when
> > an PA-2FE-FX (10/100 version) is installed?
> > 
> > Only seems to happen when both ports are connected.. IOS version Is 12.2.29
> > - but also crashes on 12.3
> 
> Well, sort of.  I've never used a PA-2FE-FX, but we've had lots of fun
> with PA-2FE-TX adaptors.  VIP2s crashing when the 2nd port is used, 
> and 7206s (NPE400/12.2(18)S) behaving weird and crashing when both ports
> are in use ("in use" = "about the amount of traffic that a starting eBGP
> session with a full BGP table causes", so not very much of it).
> 
> I think it might be something in the hardware revision, as not everybody
> sees this problem.  "show diag" for the affected boards says "hardware
> revision B0".
> 
> Another PA-2FE-TX, with hw rev "C0", works in the same 7206/NPE400 without 
> any issues, lots of traffic on both ports.
> 
> gert
> -- 
> USENET is *not* the non-clickable part of WWW!
>                                                            //www.muc.de/~gert/
> Gert Doering - Munich, Germany                             gert at greenie.muc.de
> fax: +49-89-35655025                        gert at net.informatik.tu-muenchen.de


More information about the cisco-nsp mailing list