[c-nsp] Cisco 7206VXR as ATM switch

[Alex Rubenstein]

The feature you want is

 	http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120limit/120s/120s27/fslocal.htm

But appears to be only on 12.0S, which is not VPDN/PPPOE capable.

The VXR could do this, but you'd need two. One to act as an ATM switch, 
the other to do PPPOE. Considering stuff, this may not be a bad move.




On Wed, 1 Jun 2005, Shiraz wrote:

> Hi,
>
> I'm using a Cisco 7206VXR (Broadband Remote Access Server) primarily for the
> purpose of ATM termination using PPPoE. IP is assigned by the RADIUS after
> successful authentication. IOS version is 12.2(15)T8.
>
> I'm thinking of using this router as ATM switch as well as BRAS for ATM
> termination. I'd like to switch few customers for point-to-point connections
> in order to establish L2 VPNs using ATM switching. I'd also want to
> terminate ATM using PPPoE for Internet customers.
>
> Is it possible to use this 7206VXR to fulfill both purposes? Is there any
> specific IOS which can provide ATM switching feature along with ATM
> termination?
>
> Any comment/suggestion/help would be highly appreciated.
>
> Regards.
>
>
> --
> Shiraz Malik
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>

-- 
Alex Rubenstein, AR97, K2AHR, alex at nac.net, latency, Al Reuben
Net Access Corporation, 800-NET-ME-36, http://www.nac.net