[c-nsp] AS5400 TLB (Load/Fetch) Exception help

[Rodney Dunn]

It's most likely a software problem.

Open a TAC case so the TAC engineer can decode the
stack trace.

provide;
sh ver
sh stack
crashinfo file if there is one in flash/bootflash.

Rodney



On Wed, Jun 01, 2005 at 11:17:01AM -0400, Victor Matherly wrote:
> 
> Anyone have any info on this error? I get this at bootup on one of our AS5400 
> systems. 
> 
> 
> System Bootstrap, Version 12.1(2r)XD1, RELEASE SOFTWARE (fc1)
> Copyright (c) 2000 by cisco Systems, Inc.
> 
> *** TLB (Load/Fetch) Exception ***
> Access address = 0x0
> PC = 0xbfc1e740, Cause Reg = 0x1000008, Status Reg = 0x30400c03
> Interrupt Ctrl Reg = 0x1082
> 
> this error message is repeated continuously. Is this unit DOA?
> 
> thank you
> 
> 					
> -- 
> Victor Matherly
> Wave Communications
> Systems Engineer
> Voice:508-761-5006
> Fax:508-761-5116
> Direct:508-395-5065
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/