[c-nsp] Connecting PSAX 1250 to Cisco 7206

[Malik Naeem]

Dear All

I am trying to connect PSAX 1250 to Cisco 7206 through OC-3 interface. 
The port adapter used in Cisco7200 is "PA-A3-OC3MM" and the card used in 
PSAX is "OC-3cMMAQ". I am using the following configuration on Cisco for 
the OC-3 interface:

interface ATM2/0
  no ip address
  atm clock INTERNAL
  atm uni-version 3.0
  atm sonet stm-1
  no atm ilmi-keepalive
end

The configuration on PSAX has also been done accordingly but its not 
working.

Regards

Naeem-ud-Din
Operations Engineer
Dancom OnLine Services
Islamabad, Pakistan.