[c-nsp] IMA on 7200 towards SBC (was: Bonded (IMA) SDSL Config)

[Per Carlson]

On Sun, Jun 05, 2005 at 09:28:17PM -0700, Bill D'Anjou wrote:
> 
> "I just need to see code for interfacing to SBC California (for ADSL).

OK, this is on the other end of the DSL line. I thought you were
struggling with bonding at the CPE-end, not at the Core-end.

> I have 4 T1's plugging into a 7206 with an 8-port IMA card.  What
> settings need to be changed from default?  Also, a basic "tutorial" on
> how to configure VP/VC's, etc. would be helpful.  Once we get one or
> two customers up & running, I'm sure we'll be self-sufficient -
> getting to that point is the problem!

I don't have any experience with neither IMA-cards nor SBC California,
but someone else on this list might do. 

-- 

Regards, Per Carlson

Ehrman's Commentary:
  (1) Things will get worse before they get better.
  (2) Who said things would get better?