[c-nsp] Logging WIC alarms

Tue Jun 7 23:06:06 EDT 2005

That command doesn't log anything though.

It just changes how yellow alarms are generated or acted on.

Rodney

On Tue, Jun 07, 2005 at 10:53:02PM -0400, Ers wrote:
> service-module t1 remote-alarm-enable
> 
> http://www.cisco.com/univercd/cc/td/doc/product/software/ios113ed/113t/113t_
> 3/36t1csu.htm#xtocid17
> 
> 
> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net
> [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Brian Wallingford
> Sent: Friday, June 03, 2005 3:40 PM
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] Logging WIC alarms
> 
> Hello,
> 
> Is there a config-mode option for logging alarm states of WIC-*DSU's in
> IOS?
> 
> cheers,
> brian
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/