[c-nsp] More routed ethernet interfaces on 2800 series

[Mark Kelly]

>From my reading of documentation on these modules (URL escapes me at
present)
They support 15 Vlan interfaces per switching module, along with standard
layer3
switch features etc.  I do plan to use a 2811 with 2 4port modules for this
sort of
functionality so I hope my understanding of them has been correct.

Mark

----- Original Message ----- 
From: "Sam Stickland" <sam_ml at spacething.org>
To: <cisco-nsp at puck.nether.net>
Sent: Wednesday, June 08, 2005 7:32 PM
Subject: [c-nsp] More routed ethernet interfaces on 2800 series


> Hi,
>
> I notice that on http://tinyurl.com/8alq3 [1] cisco only list ethernet
> switching modules (for example NM-16ESW or HWIC-4ESW). Does this mean that
> these routers don't support any additional routed ethernet interfaces (LAN
> interface modules).
>
> I'm assuming that these ethernet switching modules don't report their
> status separately to IOS, and show up like the 4-port switch on the 837,
> which is simply seen as Ethernet0 (Only one 1 IP address supported, no
> dot1q subinterfaces, all ports permamently auto-sensing).
>
> Sam
>
> [1]
>
http://www.cisco.com/en/US/products/ps5854/products_data_sheet0900aecd8016fa68.html
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>