[c-nsp] maximum number of equal cost route supported?

[Tantsura, Jeff]

CCO


maximum-paths

To control the maximum number of parallel routes an IP routing protocol can
support, use the maximum-paths command in router configuration mode. To
restore the default value, use the no form of this command. 

Defaults

The default for Border Gateway Protocol (BGP) is one path. The default for
all other IP routing protocols is four paths. 

-----Original Message-----
From: Joe Shen [mailto:sj_hznm at yahoo.com.cn]
Sent: Wednesday, June 15, 2005 11:07 AM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] maximum number of equal cost route supported? 


Hi,

what's the max number of equal cost route supported by
IOS? 

Could I modify that limit ?

thanks

Joe


	

	
		
___________________________________________________________
欢迎注册雅虎超大容量免费邮箱 
http://cn.mail.yahoo.com 

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/