??: Re: [c-nsp] maximum number of equal cost route supported?

[Jeff Kell]

Well, I take that back :-)

> http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fiprrp_r/bgp_r/1rfbgp1.htm#wp1257092

> The maximum-paths command is used to set the number of parallel
> (equal-cost) routes that BGP will install in the routing table to
> configure multipath loadsharing. The number of paths that can be
> configured is determined by the version of Cisco IOS software. The
> following list shows current limits:
> 
> •Cisco IOS Release 12.0S based software: 8 paths
> 
> •Cisco IOS Release 12.3T based software: 16 paths
> 
> •Cisco IOS Release 12.2S based software: 32 paths

Jeff