[c-nsp] DHCP Relay on 4908G-L3

[nevot]

Yes, but remember that helper-address will receive more other
broadcast than dhcp requests, such tftps, netbios, and this may cause
unwanted traffic on your net.

remember to do:
Router1(config)#no ip forward-protocol udp tftp
Router1(config)#no ip forward-protocol udp nameserver
Router1(config)#no ip forward-protocol udp domain
Router1(config)#no ip forward-protocol udp time
Router1(config)#no ip forward-protocol udp netbios-ns
Router1(config)#no ip forward-protocol udp netbios-dgm
Router1(config)#no ip forward-protocol udp tacacs


2005/6/22, Kristofer Sigurdsson <ks at rhi.hi.is>:
> On Wed, 2005-06-22 at 12:35 +0330, Darian wrote:
> > Hi
> >
> > Please can I have DHCP Relay on cisco switch 4908G-L3 ?
> 
> Interface config, the egress interface towards the DHCP clients:
> 
> ip helper-address <DHCP server's IP address>
> 
> --
> Kristófer Sigurðsson         | Tel: +354 525 4103 / MSN: ks at rhi.hi.is
> Netsérfr./Network specialist | Reiknistofnun HÍ/University of Iceland
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>