[c-nsp] HELP!!!!Aironet 1200 Problem Routing

[Eusebio López]

hello,
 
when you say to "The Access point doesn't actually * route *",
you talk about to that only it can work like a Bridge?
can the AP work like router?
 
Regards.

	-----Mensaje original----- 
	De: Kristofer Sigurdsson [mailto:ks at rhi.hi.is] 
	Enviado el: jue 28/04/2005 17:46 
	Para: Eusebio López 
	CC: cisco-nsp at puck.nether.net 
	Asunto: Re: [c-nsp] HELP!!!!Aironet 1200 Problem Routing
	
	

	Ahemm, a slight clearification... 

	On Thu, 2005-04-28 at 15:43 +0000, Kristofer Sigurdsson wrote: 
	> Hi, 
	> 
	> On Thu, 2005-04-28 at 17:18 +0200, Eusebio López wrote: 
	> > First of all, excuse me, because my english is very poor. I hope it could be enough to explain that i want. 
	> > 
	> > I have this problem: 
	> > 
	> > I have a Cisco Access Point 1200 Aironet with Radius to which I connect to the AP by means of one pda. I have understood that the AP routing different networks.

	> 
	> True, the AP1200 can route different networks, but in order to seperate 
	> them, you will need to create multiple SSIDs and assign a unique VLAN 
	> per SSID. 

	The access point doesn't actually *route*, but it can seperate traffic 
	using VLANs and then trunk them to a L3 device, which can route between 
	the VLANs. 

	-- 
	Kristófer Sigurðsson         | Tel: +354 525 4103 / MSN: ks at rhi.hi.is 
	Netsérfr./Network specialist | Reiknistofnun HÍ/University of Iceland