[c-nsp] disable console port

Oliver Boehmer (oboehmer) oboehmer at cisco.com
Thu Jun 30 10:17:14 EDT 2005


Douglas Todd <> wrote on Thursday, June 30, 2005 4:03 PM:

> You can change the config register to prevent using the break key
> which is needed for password recovery.
> 
>
http://www.cisco.com/en/US/customer/products/hw/routers/ps133/products_t
ech_
> note09186a008022493f.shtml

This does not apply to the first seconds during startup, so you will
still be able to "break" while the router boots up with the "Ignores
break" bit set in confreg.

	oli



More information about the cisco-nsp mailing list