[c-nsp] Monitoring failed state of DSL / Cable (Ethernet) interfaces

[Josh Duffek]

Need to get an image that has CSCds88143.  Something like 12.3T or
better I think.

Thanks,

josh duffek    network engineer
consultantjd16 at ridemetro.org

> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-
> bounces at puck.nether.net] On Behalf Of Brian Feeny
> Sent: Tuesday, March 01, 2005 12:10 PM
> To: 'cisco-nsp'
> Subject: [c-nsp] Monitoring failed state of DSL / Cable (Ethernet)
> interfaces
> 
> 
> I have a configuration where I am load balancing default routes over 2
> WAN interfaces.
> 
> One interface is a T1 and the other is an ethernet interface plugged
> into a DSL / Cable bridge.
> 
> My concern is that if the connectivity goes down on the Cable / DSL
> then the interface
> may stay up, since the ethernet connection may still look good.
> 
> I think some of you are using SAA stuff to deal with his, does anyone
> have any links on this?
> 
> Basically I just want to check the next hop and if its down, then pull
> the route.
> 
> Brian
> 
> ---------------------------------------------
> Brian Feeny, CCIE #8036, CISSP
> Network Engineer
> ShreveNet Inc.
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/