[c-nsp] 2600 load balancing

[Andriy A. Yerofyeyev]

Hi Dani !

I use MLP , its provide good redundancy. Also you may use OSPF for load 
balancing. In my case 2620 connected to my 7200.

If you have 2 T1 from different ISP - its really interesting question;)

> 
> I have a cisco 2620 (MPC860) router with two T1-s connected to it.
> 
> What would be the best method to load balance the traffic between the two?
> 
> Thanks,
> 
> Alban
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
> 
> 


-- 


Andriy A. Yerofyeyev
Phone : 1-718-732-3803

IMPROCOM, INC
www   : http://www.improcom.com

Phone : 1-866-IMPROCOM (467-7626) from anywhere in the US.
Phone : 1-718-769-3400 from metropolitan New York.
Fax:  : 1-718-769-4695
Im    : icq:          6886830
         aolim:        aerofeev
         msnmessenger: andriy at improcom.com
         yahooim:      andriyyerofyeyev