[c-nsp] ACL 1000 deny hits per second. Only 10 packets in logfile

[Roger Wiklund]

Hi,

Yes I know, but every five minuts there are rate-limit or packets missed 
~10-15

//Roger

On Tue, 8 Mar 2005, Amol Sapkal wrote:

> I am not sure, but the router will log only a few packets per few
> seconds and not all the packets, otherwise the cpu would overload
> logging all the packets.
>
> -Amol
>
>
> On Tue, 8 Mar 2005 09:26:19 -0500, Dave Temkin <dave at ordinaryworld.com> wrote:
>> Do you have anything defined for the "logging rate-limit" command?
>>
>> On Tue, 8 Mar 2005 15:19:30 +0100 (CET), Roger Wiklund wrote
>>> Hi, I have a strange problem.
>>>
>>> In my access-list i get about 1000 deny hits/s. But when I look in
>>> my log I only see about 10 deny packets/minuts. Have I overlooked something?
>>>
>>> access-list xxx permit ip xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx any
>>> access-list xxx deny ip any any log-input
>>>
>>> //Roger
>>> _______________________________________________
>>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>>
>> David Temkin
>>
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>>
>
>
> -- 
> Warm Regds,
>
> Amol Sapkal
>
> --------------------------------------------------------------------
> An eye for an eye makes the whole world blind
> - Mahatma Gandhi
> --------------------------------------------------------------------
>