[c-nsp] ip virtual-reassembly

[Paul Stewart]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Can anyone tell me how to completely disable this function?

If you do a "no ip virtual-reassembly" and reboot the router it comes
back into the config...

We have a customer who is initiating a VPN connection from behind a 1711
that has ip virtual-reassembly on it.  It breaks the VPN because of the
packets being re-assembled.... only solution we could find in a hurry
was to downgrade to an old IOS which I didn't like...

More info on it at
http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123newft/123t/123t_8/gt_vfrag.htm

Thanks,

Paul
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.0 (MingW32)

iD8DBQFCMHgSqMetgU57IuQRAmwzAJ9cWkrlE3GmumhwztWfQJaPdSjZLQCdE0bY
E5GLf9U2KE9RqBlXTrwdPLc=
=J8aZ
-----END PGP SIGNATURE-----