[c-nsp] Thanks for the help. crossover ain't working. Tried it.

[Jim McBurnett]

Try the Auto mdix command also..
Jim 

-----Original Message-----
From: Joe Gilliam [mailto:joegilliam at sbcglobal.net] 
Sent: Monday, March 14, 2005 4:54 PM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] Thanks for the help. crossover ain't working. Tried it.

OK, thanks again for the help.
 
I tried to use the crossover.  It didn't work.  I am connecting to the
L3 just like I was to the 2948G.  This one don't like it.  SO I can't
figure out why it isn't connecting.  I have probably got something wrong
on port 47.  
 
What should I check for?  There is not an IP address configured for that
port.  I am watching the console and the interfaces come up and down
like they should.
 
It's probably something stupid I did.  
 
any Ideas?  
 
Thanks again for the help.
 
Joe Gilliam

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/