[c-nsp] 2MBit leased line and dsl backup

[Jim McBurnett]

Look up tracked objects...
This is a new feature that can swing routing destination based on
objects..

http://www.cisco.com/en/US/about/ac123/ac114/ac173/Q2-04/department_tech
tips.html 



Jim
-----Original Message-----
From: Florian Taeger [mailto:mail at konfu.de] 
Sent: Tuesday, March 15, 2005 11:26 AM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] 2MBit leased line and dsl backup

Hi everyone,

I am looking for a config for an 2801 Router. I have one 2MBit S2M
leased line
(WIC-1T) and a adsl backup (Wic-1ADSL=). Can someone tell me how to
configure the adsl line to be a backup line? It should only be used, if
the serial interface is down or the next-hop is unreachable. if this
happenes, the default router for this router should point to the dsl
line.

The serial line workes fine, but I have no idea how to get the dsl line
to be the backup an dial when it is needed.

Best regards

Florian

----------------------------------------------------------------
This message was sent using IMP, the Internet Messaging Program.
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/