[c-nsp] 6500 with SUP720 SPAN questions, Again...

Virgil virgil at webcentral.com.au
Thu Mar 17 20:22:38 EST 2005


On 18/3/05 7:29 AM, "Tim Stevenson" <tstevens at cisco.com> wrote:

Tim,

> And then configure a single SPAN session like so:
> 
> mon ses 1 source vlan 10 - 13
> mon ses 1 dest int gig 1/1 - 4
> 
> This ends up spanning just vlan 10 traffic to int gig 1/1, just vlan 11
> traffic to int gig 1/2, etc.

That's excellent information.  What would be required to receive traffic for
a couple of vlans to one port, and include the dot1q headers as well?


Regards
Virgil




More information about the cisco-nsp mailing list