[c-nsp] OSPF dead timer problem

[Rodney Dunn]

Have you turned the timers down?

You can turn them down too low.

Rodney

On Wed, Mar 23, 2005 at 11:28:18AM -0800, Matt Bazan wrote:
> Hello,
> 	I'm no OSPF expert (by any stretch) and I'm seeing a strange
> anomaly between two of our 3640 routers.  What's happening is that the
> dead timer is expiring between on one of our T1 p2p links even though
> the circuit between the two routers is fine (everyting is up/up).  This
> is causing a brief (few seconds or so) loss of communication between the
> devices but not long enough to trigger an ospf re-convergence (if I have
> my terminology correct).  Ideas as to what is going on?  Thanks,
> 
>   Matt
> 
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/