[c-nsp] Netflow output in hex or decimal

[John Jackson]

I would be fine with either. But now would be a good time to remind everyone
that if the have 12.SX on 6500's (7600's)  they could use

show mls netflow ip nowrap

This gives everything in decimal, gives bytes and age, and you can filter
based on source or destination ip subnet.  This is great improvement over
the old "sho ip cache flow"

My $.02

John
  



> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-
> bounces at puck.nether.net] On Behalf Of Rodney Dunn
> Sent: Thursday, March 24, 2005 9:54 AM
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] Netflow output in hex or decimal
> 
> 'sh ip cache flow' shows port number information in
> hex.
> 
> We'd like to change that to decimal to easier consumption.
> 
> The pros:
> easier reading
> 
> The cons:
> no way to use the same command and have backwards
> compatability so people using some screen scraper
> or scripts may have to change them
> 
> 
> The other option is to add an extension to the
> sh ip cache flow command with a decimal option but
> then that leaves hex (which most people don't like)
> as the default.
> 
> Which would you prefer?
> 
> Rodney
> 
> 
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/