[c-nsp] Netflow output in hex or decimal

[John Jackson]

Why not go with a whole new command

Show netflow

And give it all the cool tricks that the show mls netflow has.

Then give an output at the top sho ip cache flow command like:

Consider using the show netflow command.  All new features will be added to
this command.

Then begin the normal output.



> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-
> bounces at puck.nether.net] On Behalf Of Gert Doering
> Sent: Thursday, March 24, 2005 10:30 AM
> To: Rodney Dunn
> Cc: cisco-nsp at puck.nether.net
> Subject: Re: [c-nsp] Netflow output in hex or decimal
> 
> Hi,
> 
> On Thu, Mar 24, 2005 at 10:54:06AM -0500, Rodney Dunn wrote:
> > 'sh ip cache flow' shows port number information in
> > hex.
> >
> > We'd like to change that to decimal to easier consumption.
> 
> For us, either "as it is now" (hex) or "all in decimal" (new) would make
> sense.
> 
> An option to switch display modes bears some danger, as you can end up
> with cut-and-paste'd stuff in e-mails, without the information whether it
> was decimal or hex mode - more range for confusion.
> 
> So if I had to decide, I'd go for "decimal only" - I have gotten used to
> hex output, but I can see colleagues still getting confused.
> 
> gert
> 
> --
> USENET is *not* the non-clickable part of WWW!
> 
> //www.muc.de/~gert/
> Gert Doering - Munich, Germany
> gert at greenie.muc.de
> fax: +49-89-35655025                        gert at net.informatik.tu-
> muenchen.de
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/