[c-nsp] Cisco MultiLink PPP

[Lawrence Wong]

--- Gert Doering <gert at greenie.muc.de> wrote:
> Hi,
> 
> On Mon, Mar 28, 2005 at 09:33:33AM -0800, Lawrence
> Wong wrote:
> > I guess I need the G703 cos that's what the telco
> > drops in my lap.
> 
> Every E1 is G.703.  
> 
> The question is "will you need raw bits on G.703"
> (giving you 2048 kbit/s. 
> net data throughput) or "will you need 32x64kbit/s
> G.704 framing on top 
> of G.703, of which you can use 31x64 for data (1984
> kbit/s. net throughput)"?
> 
> You can run G.703/G.704 framing on top of every E1
> you get, except, as
> Andre said before, if you need to talk to a CSU/DSU
> on the other end
> that insists on running 2048 kbit/s. unframed G.703.

Thanks for the details. Is it possible for me to get a
pair of VWIC-1MFT-G703 (one each on two different
2621) to talk to each other so that I can do some
testing?

I know it is possible to do a back to back cross over
between "normal" serial interfaces like that found on
the 2514 and WIC-2T. But what about the
VWIC-1MFT-G703? Anyone tried before using RJ45 cables
to connect routers back to back? Any special settings
to look out for?

Thanks,


		
__________________________________ 
Do you Yahoo!? 
Yahoo! Mail - Easier than ever with enhanced search. Learn more. 
http://info.mail.yahoo.com/mail_250